← All technical articles · News
Industry Insights
REACH SVHC and ELV Compliance for Chassis Parts Exporters: A Documentation Checklist Buyers Can Audit

A certificate that says “REACH compliant” is not evidence. For chassis parts, European buyers now ask for four separate things: an article-level SVHC declaration against the current Candidate List, a SCIP reference or a data pack their importer can file, a per-homogeneous-material ELV declaration for lead, mercury, cadmium and hexavalent chromium, and a change-control record that ties all three to the actual part number.
The pressure rose in 2026. On 4 February, ECHA added n-hexane and bisphenol AF to the Candidate List, taking it to 253 entries [1]. The six-month Article 7(2) notification window for those two substances closed on 4 August [2]. On 24 July, Regulation (EU) 2026/1738 — the regulation that replaces the End-of-Life Vehicles Directive — was published, entering into force on 13 August and applying from 1 September 2028 [3]. None of this changes the physics of a ball joint. It does change what has to be on paper before a container leaves the factory.
Quick reference: the six documents EU buyers actually audit
| Document | What it proves | Who can sign it | Most common rejection |
|---|---|---|---|
| Article-level SVHC declaration | Substance name and concentration against 0.1% w/w in the article | Manufacturer, backed by compounder and coating supplier declarations | Generic “REACH compliant” letter with no part number or revision date |
| Material breakdown with weights | How the percentage was calculated | Manufacturer | No homogeneous-material weights, so the buyer cannot recalculate |
| SCIP number or SCIP data pack | The Waste Framework Directive notification is complete | EU importer or distributor | Number belongs to another article, or to an obsolete revision |
| ELV declaration | Pb, Hg, Cd and Cr(VI) per homogeneous material, with any exemption entry cited | Manufacturer | Exemption cited without its scope or expiry date |
| Test reports | Measured concentrations in the materials that matter | Accredited laboratory | Mixed or composite sample instead of per-material testing |
| Change-control record | The declaration still matches the part being shipped | Manufacturer | No notification after a compound, coating or supplier change |
Two thresholds, two different units
The most common mistake is treating REACH and ELV as one compliance number. They are not.
REACH Article 33 applies at the level of the article. Any supplier of an article containing a Candidate List substance above 0.1% weight by weight must give the recipient enough information for safe use, including at minimum the substance name; a consumer request must be answered free of charge within 45 days [4]. Article 7(2) adds a notification duty to ECHA when the substance is present above 0.1% w/w and in quantities over one tonne per year, within six months of the listing [2].
The ELV rules work per homogeneous material. Lead, mercury and hexavalent chromium are tolerated up to 0.1% by weight in any homogeneous material, and cadmium up to 0.01% [5]. That is why a brass bushing with 3% lead in the brass can sit inside an ELV exemption and still trigger a REACH Article 33 communication, because lead is also on the Candidate List. An ELV exemption removes the ELV prohibition for a defined application; it does not erase the SVHC information duty.
SCIP sits on a third legal basis. Since 5 January 2021, any supplier placing an article on the EU market that contains a Candidate List substance above 0.1% w/w must submit information to ECHA’s SCIP database under the Waste Framework Directive [6]. A manufacturer outside the EU cannot file directly; the EU importer or distributor is the party with the obligation, which is why importers increasingly demand a ready-to-file data pack rather than a PDF certificate [7].
Where chassis parts actually fail
Rubber-to-metal bushings: the declaration stops at the assembly plant too often
A bushing is a bonded assembly of rubber, adhesive, metal and sometimes a plastic sleeve. The rubber compound, the bonding adhesive and the degreasing step can each introduce a listed substance. n-Hexane, added in February 2026, is used in formulations, polymer processing, coatings and cleaning agents [1]. A declaration signed only by the assembly plant, without a compounder and adhesive supplier statement underneath it, is a claim about inputs nobody verified.
Ball studs and tie rod ends: leaded free-machining steel
Free-machining steel can contain lead as an alloying element. Annex II entry 1(a) of the ELV Directive tolerates up to 0.35% lead by weight in steel for machining purposes and in batch hot-dip galvanised steel components [8]. Many suppliers simply write “standard steel” and leave the exemption unstated. That is not auditable: the buyer cannot tell whether the part relies on 1(a), whether the heat lot actually qualifies, or whether the exemption’s scope still covers the vehicle it is going into.
Brass and copper alloy components
Copper alloys containing up to 4% lead by weight are covered by Annex II entry 3 [8]. The same lead is a Candidate List substance, so the article-level REACH declaration still has to state it. Buyers who receive “no SVHC” for a leaded brass part correctly reject the document.
Coatings, passivation and hexavalent chromium
Hexavalent chromium in corrosion-preventive coatings is one of the four ELV-restricted substances. The remaining exemptions are narrow, application-specific and time-limited, and the Commission has been reviewing them for years [8]. For chassis parts, the practical answer is to specify zinc-flake or trivalent passivation and to ask the coater for a Cr(VI) statement per coating line, not per factory.
Grease, seals and fluorinated rubber
Grease is a mixture, not an article, so it travels with a safety data sheet rather than an SVHC article declaration. That does not make it irrelevant: the grease is inside the article the buyer places on the market. Bisphenol AF, added to the Candidate List in February 2026, is used as a process regulator and cross-linking agent [1], which puts fluorinated rubber seals and certain polymer processing aids on the screening list.
Aluminium control arms
Aluminium alloys for machining may contain up to 0.4% lead under entry 2(c), but that sub-entry is limited to vehicles type-approved before 1 January 2028 and spare parts for those vehicles [8]. A forged aluminium arm that was acceptable in 2024 therefore needs its exemption route re-checked for a 2029 model-year programme.
What Regulation (EU) 2026/1738 changes, and what it does not
The new regulation was published on 24 July 2026, entered into force on 13 August 2026, and replaces both the ELV Directive and the recyclability type-approval Directive from 1 September 2028 [3][9]. Article 5 continues the restriction on lead, mercury, cadmium and hexavalent chromium, and Annex IV keeps the same concentration values: 0.1% by weight per homogeneous material for lead, mercury and Cr(VI), and 0.01% for cadmium [10].
What is new is the documentation layer around the part. The regulation introduces a circularity strategy for manufacturers, standardised information so that dismantlers and repairers can safely remove and replace components, and a Digital Circularity Vehicle Passport for each vehicle placed on the market from 1 September 2032 [11]. It also sets recycled-plastic targets of 15% from 2032 and 25% from 2036, with at least 20% of that content coming from end-of-life vehicles or parts removed during use [11]. The Commission must report on substances of concern in vehicles by 14 February 2028 [3].
For a chassis parts supplier, the direct legal duties still sit with the EU importer and the vehicle manufacturer. The commercial effect is different: material composition, removal information and recycled content will be written into tier-1 contracts long before 2028. Suppliers who can only produce a one-page “RoHS/REACH compliant” letter will be asked to requalify.
How to screen 253 entries without rebuilding the BOM every quarter
A full substance-by-substance re-test on every part number is neither necessary nor affordable. A tiered programme is more defensible.
1. Freeze the part-number BOM. List every homogeneous material with its weight: housing, ball stud, boot, bushing compound, adhesive, coating, grease, fastener. The weights are what let a buyer recalculate a percentage instead of trusting a summary.
2. Push the declaration one tier down. Ask the compounder, adhesive maker, coater, grease supplier and fastener supplier for a statement against the current Candidate List, with a revision date and the weight of the material in the part. An assembly-level declaration without these is a house of cards.
3. Screen at article level first, then test selectively. Calculate the worst-case concentration in the finished article. If a listed substance is clearly below 0.1% w/w with margin, document the calculation. If it is close to the threshold, or the material is known to carry the substance, test that homogeneous material.
4. Keep one living matrix. Substance × part number × concentration × source document × revision. When ECHA updates the list — twice a year in recent practice — the matrix tells you which part numbers need a new statement instead of triggering a blanket re-declaration.
5. Re-declare on change, not only on request. A compound change, a new coater, a different grease or a moved heat-treatment line can invalidate a declaration. Industry practice is to notify buyers within 30 days of a relevant change (industry estimate, not a legal deadline).
6. Version everything. A declaration without a revision number and a date is not auditable, even if every word in it is true.
What each type of buyer needs
EU importer or distributor. They need the article-level SVHC data, safe-use text and enough material detail to file SCIP. Give them a data pack mapped to their article identifiers, not a certificate with your own part number only.
Tier-1 and OEM programmes. They will usually push the data into their own material data system and compare it with the PPAP package. The declaration has to match the material actually used in the approved process; a declaration written for a sister plant is a nonconformity waiting to happen.
Aftermarket distributors. They need a per-part-number statement they can forward to repair shops and, on request, to consumers. The 45-day consumer response clock runs from their receipt of the request, so the data has to be retrievable by part number, not buried in a project folder.
About Hetian
Hetian has manufactured chassis parts since 1998, operates a 160,000 m² plant under IATF 16949, and runs a CNAS-accredited laboratory for dimensional, fatigue, pull-out and salt-spray validation. Parts ship to more than 30 countries. For compliance work, we issue part-number-level material declarations, exemption statements and test reports that an EU importer can attach to a SCIP filing. See the ball joint range or contact the engineering team with the part numbers you need covered.
FAQ
Is a REACH compliance certificate enough for a chassis part?
No. A certificate is a statement; the buyer needs the substance name, the concentration basis, the part number and the revision date. Article 33 requires information sufficient for safe use, not an assertion of compliance [4].
If a part qualifies for an ELV Annex II exemption, do we still have to declare SVHC content?
Yes, when the substance is on the Candidate List and present above 0.1% w/w in the article. The ELV exemption addresses the ELV prohibition for a defined application; it does not remove the REACH communication duty [4][8].
Who files SCIP, the Chinese manufacturer or the EU customer?
The EU importer or distributor placing the article on the market holds the filing obligation. A non-EU manufacturer cannot submit directly, so the practical answer is to supply a complete data pack that the importer can file without editing [6][7].
Is the 0.1% threshold calculated on the whole part or on each material?
For REACH Article 33 and SCIP, the threshold is expressed on the article. For the ELV substance limits, it is per homogeneous material. The two calculations can produce different answers for the same part, which is exactly why both declarations are requested [4][5].
Do we have to test every part number every year?
No. A declaration-led programme with targeted testing of high-risk materials is the normal approach. Re-test when the material, coating, grease or supplier changes, or when a new substance listing plausibly affects the part.
Does Regulation (EU) 2026/1738 change the four-substance limits?
It carries them over. Article 5 continues the restriction and Annex IV keeps 0.1% per homogeneous material for lead, mercury and hexavalent chromium and 0.01% for cadmium [10]. The bigger change is the circularity and dismantling information layer [11].
Are spare parts for older vehicles exempt from the ELV restrictions?
Spare parts placed on the market after 1 July 2003 for vehicles put on the market before that date are exempt, except wheel balance weights, carbon brushes for electric motors and brake linings [5]. The exemption is for the vehicle generation, not for the part number forever.
How quickly must a consumer SVHC request be answered?
Free of charge, within 45 days of receipt, when the article contains a Candidate List substance above 0.1% w/w [4]. That deadline belongs to the supplier answering the consumer, so the data must be available to whoever answers.
Related Guides
Compliance work overlaps with quality verification. These guides go deeper on the parts and processes behind the paperwork:
- Right to Repair Compliance for Chassis Parts Suppliers: A Verification Checklist
- Aftermarket Control Arm Quality: A Supplier Verification Checklist
- Chassis Part Corrosion Protection: Coating Systems, Salt Spray Hours and What Buyers Should Specify
- Ball Joint Factory Quality Gates: How Ball Studs Are Tested Before Shipment
- Mexico Auto Parts Import Compliance: A Supplier Checklist After the 2026 Tariff Exemption Decree
- Product category: ball joints and suspension joints
References
[1] EU REACH: Candidate list includes 253 SVHCs now, TÜV SÜD, 29 October 2026, https://www.tuvsud.com/en/knowledge-hub/technical-updates/consumer-products-and-retail-essentials/eu-reach—candidate-list-includes-253-svhcs-now, accessed 20 November 2026.
[2] REACH SVHC: n-Hexane and the 4 August Deadline, Cleo Labs, 16 August 2026, https://www.cleolabs.co/en/blog/eu-svhc-scip-notification-2026, accessed 20 November 2026.
[3] Regulation (EU) 2026/1738 on circularity requirements for vehicle design and on management of end-of-life vehicles, Official Journal of the EU, 24 July 2026, https://eur-lex.europa.eu/legal-content/EN/TXT/PDF/?uri=OJ:L_202601738, accessed 20 November 2026.
[4] Regulation (EC) No 1907/2006, Article 33: Duty to communicate information on substances in articles, EUR-Lex text via legislation.gov.uk, https://www.legislation.gov.uk/eur/2006/1907/article/33, accessed 20 November 2026.
[5] Consolidated text of Directive 2000/53/EC on end-of-life vehicles, Annex II, Publications Office of the EU, 6 March 2020, http://publications.europa.eu/resource/cellar/1af7847a-7378-11ea-a07e-01aa75ed71a1.0007.02/DOC_2, accessed 20 November 2026.
[6] Requirements for SCIP notifications, European Chemicals Agency via Publications Office of the EU, 26 August 2021, https://op.europa.eu/en/publication-detail/-/publication/887091cb-0938-11ec-b5d3-01aa75ed71a1, accessed 20 November 2026.
[7] Kort om anmälan av ämnen i varor till SCIP-databasen, Kemikalieinspektionen, 17 November 2026, https://www.kemi.se/lagar-och-regler/lagstiftningar-inom-kemikalieomradet/eu-gemensam-lagstiftning/avfallsdirektivet—scip/kort-om-anmalan-av-amnen-i-varor-till-scip-databasen, accessed 20 November 2026.
[8] Commission Directive (EU) 2016/774 amending Annex II to Directive 2000/53/EC, EUR-Lex, 18 May 2016, https://eur-lex.europa.eu/legal-content/EN/TXT/HTML/?uri=CELEX%3A32016L0774, accessed 20 November 2026.
[9] End-of-Life Vehicles, European Commission, Directorate-General for Environment, in force 13 August 2026, https://environment.ec.europa.eu/topics/waste-and-recycling/end-life-vehicles_en, accessed 20 November 2026.
[10] Annex IV to Regulation (EU) 2026/1738: maximum concentration values for lead, mercury, cadmium and hexavalent chromium, Iberley, 17 August 2026, https://www.iberley.es/legislacion/anexo-4-reg-ue-2026-1738-8-julio-2026-doue-relativo-los-requisitos-circularidad-aplicables-diseno-los-vehiculos-gestion-los-vehiculos-final-su-vida-util, accessed 20 November 2026.
[11] New rules for a more sustainable EU automotive sector, European Parliament, 18 June 2026, https://www.europarl.europa.eu/news/da/press-room/20260611IPR45210/new-rules-for-a-more-sustainable-eu-automotive-sector, accessed 20 November 2026.
Last updated: Nov 20, 2026 · Reviewed by the Hetian engineering team